Hall Research UHCOM-WP - Manual (Page 7)

UHBX Wall Plates
7
6.0 Model 511-POH-17W PoH Compliant Power Inserter
The 511-POH-17W is a PoH compliant power inserter that can be used to
power one end of an HDBaseT link. It passes the UTP signals across while at
the same time injects 48v power for the PD (powered device). The supply
complies with the IEEE 802.3af and will only apply power to the cable if a
compliant device is connected.
For example you can use the power injector to power the UHBX-S-WP wall
plate transmitter if the receiver does not supply power via the UTP cable.
Some TV’s and projectors have direcct HDBaseT inputs (receiver is built in
to the display), but may not be able to send power to the wall plate. So, to
connect the Wall-plate transmitter to the display, the 511-POH-17W inserter
can be utilized.
The inserter has a universal AC input and can be connected to 115~230v AC.
The package includes the following:
• Power supply module
• North American Power cord (customer must provide their own AC
input cables when used with other standards)
• 6 ft UTP Cable.
The inserter can be connected at either end, but it is recommended to locate it
at the remote end of the HDBaseT extension as shown above.