Hall Research UHCOM-WP - Manual (Page 10)

HDMI Extension on UTP
10
9.0 Specifications
Video
Standards
DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications
including 12 bit color depth, 3D video and 4K support)
Signal type TMDS
Connectors Locking HDMI input, RJ45 HDBaseT output
Resolutions DVI signal VGA (640x480) thru WUXGA (1920x1200)
HDTV signal 480i through 1080p
Digital Cinema 4K (4096x2160)
Audio
Formats All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and
DTS-HD Master Audio (32-192kHz sample rate)
Other Signals
DDC Pass-Thru DDC for reading EDID directly from remotely connected LCD
and HDCP handshake
CEC Pass-Thru DDC for Consumer Electronics Control compatible devices
RS232 Bidirectional (full-duplex) any baud rate up to 115,200
IR Extended in both directions. Carrier modulation range from 30 KHz to 60
KHz
PoH Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as
Class 2 PoE device
General
Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
Actual DC current (powering both –PSE and –PD sides) 1.8A max
Power 3.0 watts (10 BTU) maximum
Temp/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, non-condensing
Cooling Convection
Enclosure type Metal
Dimensions
2.6" H x 1.3" W x 1.8" D (66mm H x 33mm W x 46mm D)
dimensions exclude mounting tabs on front for Decora® plate
Product weight Product: 5 oz (0.31 lb or 142 g)
Shipping: 8.5 oz (0.53 lb or 241 g) includes: mud-ring & faceplate
Vibration ISTA 1A in carton (International Safe Transit Association)
Compliance CE, FCC Class A
MTBF
90,000 hours (Calculated Estimate)
Specifications are subject to change without notice