Hall Research UHCOM-WP - Manual (Page 2)

HDMI Extension on UTP
2
Table of Contents
1.0 Introduction 3
2.0 Features 3
3.0 Model numbers covered in this User’s Manual 4
4.0 UHBX-S-WP Wall plate Transmitter 4
4.1 Compatible Receivers 4
4.2 Connection Block Diagrams 5
5.0 UHCOM-WP RS232+IR Accessory for UHBX-S-WP 6
5.1 Connecting to UHBX-S-WP 6
5.2 Connection Block Diagram 6
6.0 Model 511-POH-17W PoH Compliant Power Inserter 7
7.0 Installation 8
7.1 Mounting the Transmitter and Heat Dissipation 8
7.1 LED indicators 8
8.0 Troubleshooting 9
9.0 Specifications 10
TRADEMARKS USED IN THIS MANUAL
Hall Research and its logo are trademarks of Hall Research. Any other trademarks
mentioned in this manual are acknowledged as the property of the trademark owners.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment generates, uses, and can radiate radio frequency energy and if not installed and
used properly, that is, in strict accordance with the manufacturer’s instructions, may cause
interference to radio communication. It has been designed to comply with the limits for a Class
A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are intended to provide reasonable protection against such interference when the
equipment is operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference, in which case the user at their own expense will
be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.