Disarming the vrs – Directed Electronics Matrix1X User Manual

Page 45

Disarming the VRS

Take the time to familiarize yourself with the VRS triggering se-

quence and the disarm procedure. It is important to recognize

and identify the VRS trigger sequence and know how to disarm

it in case of accidental activation.

Once the VRS is armed, it does not disarm automatically. You

must disarm it the next time you operate the vehicle. You must

disarm it with one of the following procedures:

If the system has not entered the triggered sequence (siren has

not started chirping):

1. Turn the ignition on.

2. Press

on the transmitter for one second. The

lights will flash and the siren will chirp twice.

If the system has entered the triggered sequence (siren has begun

chirping), pressing the disarm button of the transmitter will not

disarm VRS. To disarm the VRS during a VRS trigger sequence:

1. Turn the ignition on.

2. Press the Valet button the pre-

programmed number of times to

disarm the VRS system.

note: If the VRS

system has begun its chirping sequence,

the ignition must be turned off, then on to disarm. If you
are driving the vehicle at the time, pull to a safe place
away from traffic and follow the triggered sequence dis-
arm procedure.

DRW-35

➜