Directed Electronics Matrix1X - Manual (Page 19)

14 © 2 0 0 8 d i r e c t e d e l e c t r o n i c s
P Prro og grra am mm miin ng g L LC CD D rre em mo otte e
To enter programming mode
Press and hold the button until one long beep is heard.
Programming mode to customize the remote’s response is now
entered.
Beeps/Vibration On/Off
Press to select beeps/vibration On/Off. Beeps alone, vibra-
tion alone, beeps and vibration, or no beeps and vibration can be
selected. Refer to the table below for these settings.
**N Noottee:: This is icon display during programming.
B Beeeepp//V Viibbrraattee sseettttiinnggss PPrrooggrraam mm miinngg rreessppoonnssee IIccoonn ddiissppllaayy**
Beeps only (default) 1-beep Siren icon On
Vibrate only 1-vibrate Vibrate icon On
Beep & Vibrate 1-beep and 1-vibrate
Vibrate and siren icon
On
No Beep and No Vibrate 1 long beep
Vibrate and siren
icons Off
➜
n noottee:: If no buttons are pressed within 5-seconds, pro-
gramming mode will exit with 2-beeps.
P
➜