Directed Electronics Matrix1X User Manual

Page 10

System maintenance

This system needs no specific maintenance beyond remote

control battery replacement. The 2-way remote is powered by a

1.5V AAA battery. The 1-way remote is powered by a pair of 3V,

CR2016 batteries.

Baatttteerryy L

Leevveell IIn

diiccaattoorr ((2

2--w

waayy rreem

moottee))

The Battery Level indicator has four level indicators that serve as

a visual indication of battery charge. When the battery reaches a

low charge level that requires replacement, the remote control

will generate a single notification chirp, and the Battery Level

indicator will flash continuously.

Battery Replacement (2-way remote)

Gently pull the end of the battery door away from the top of the

remote control then slide the door up to expose the battery and

remove the expired battery. Place the new battery into the remote

control observing the correct polarity. When power is returned

the remote control will display all icons in the LCD and generate

all beeper tones once. Press any button on the remote to termi-

nate the beeper tone review.

Your warranty

Your warranty registration must be returned and the bar code

serial number must not be removed. If the warranty registration

is not returned, you do not have a warranty. It is also necessary to

➜