EXFO Inline Power Meter - Manual (Page 22)

Using the Optional Power Meters and VFL
18 Power Meter and VFL
Opening Result Files
Opening Result Files
You can open results files that are stored on your unit or on a USB memory
key. If you need more flexibility and a greater choice of report types, you
can also transfer results files to a computer onto which EXFO’s
FastReporter is installed.
To open results files:
1. From the button bar, tap Open.
2. If necessary, change the location from which the file should be
opened. The application will keep in memory the last selected folder.
3. From the given list of files, select the file to open.
4. Confirm with OK.
If you have already performed power measurements, but not saved
them, the application will prompt you to save your work. You must
either save or discard the unsaved measurements before being able to
open a file.
5. To view the reopened file, go to the Measurements tab. The power or
insertion loss measurements are displayed on the results list.
I
MPORTANT
The file that you will open includes the threshold values and job
information that you had set when you saved that file. These
settings will replace the current settings.