Denon AVR-985 - Manual (Page 72)

72
NOTE:
• When “Default” is selected and the cursor left button is pressed, “MODE” and “TONE” are automatically reset to the default values and
“CINEMA EQ” is set to “OFF”.
Surround parameters w
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies. Decoding is performed
with emphasis on separation performance to achieve the same
atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional
surround formats as well, because the in-phase component is
assigned mainly to the center channel (C) and the reversed phase
component to the surround (SL, SR and SB channels).
• Music
This mode is suited mainly for playing music. The front channel (FL
and FR) signals bypass the decoder and are played directly so there
is no loss of sound quality, and the effect of the surround signals
output from the center (C) and surround (SL, SR and SB) channels
add a natural sense of expansion to the sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been added.
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)
1 Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 37).
FUNCTION
(Remote control unit) (Main unit)
w Set the input mode to “AUTO” or “DTS”.
MODE
(Remote control unit) (Main unit)
2 Select the STANDARD (Dolby/DTS
Surround) mode.
1- w 3 2
1- q
4, 5 2, 6
2
4, 7
3
7
5, 6
1- q
1- w
3
1
(Remote control unit)
7 When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings. The
settings are automatically finalized and the normal display reappears after several seconds.
When the settings are made using the buttons on the remote control unit, press the “ENTER” or “SURROUND PARAMETER” button to
finish.
When performing this operation from the
main unit’s panel, press the SURROUND
MODE button, then turn the SELECT
knob and select Dolby Pro logic IIx or DTS
NEO:6.
SELECT
(Main unit) (Main unit)