Eurocom A9100 Uno 2.0 - Manual (Page 93)

Modules & Options
PC Camera Module 7 - 3
7
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to connect a
microphone to either of the microphone ports and then setup the audio recording op-
tions in Windows as follows.
1. Click Start, and click Control Panel (or point to Settings and click Control Panel).
2. Click Sound (Hardware and Sound).
3. Click Recording (tab).
4. Right-click Microphone and make sure the item is not disabled.
5. Double-click Microphone (or select Properties from the right-click menu).
6. Click Levels (tab), and adjust the Microphone sliders to the level required.
7. Click OK and close the control panels.
8. Run the camera application from the desktop shortcut.
9. Go to the Devices menu heading and select Microphone (it should have a tick
alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick
alongside it).