Directed Electronics MAXX3 - Manual (Page 30)

LED - A red light mounted at a discretionary location inside the
vehicle. It is used to indicate the status of your system.
Transmitter - A hand-held, remote control which operates the var-
ious functions of your system.
Trigger or Triggered Sequence - This is what happens when the
alarm “goes off” or “trips.” The triggered sequence of your system
consists of the siren sounding and indicators flashing.
Valet Switch - A small push-button switch mounted at a discre-
tionary location inside the vehicle. It is used to override the built-
in Immobiliser when a transmitter has been lost or damaged, and
to enter Valet Mode.
Warning Zone Response - If a dual-zone sensor is added to the
system and the light touch or outer-zone trigger is activated, the
system will generate the warning zone response. This consists of
several seconds of siren chirps.
Zone - A zone is a separate input that the alarm can recognise as
unique. Each input to the system is connected to a particular
zone. Often two or more inputs may share the same zone.
®2002 Directed Electronics, Inc. 30