Diagnostics – Directed Electronics MAXX3 User Manual
Page 19
®2002 Directed Electronics, Inc.
19
Diagnostics
The LED on your vehicles dashboard or centre console will inform
you of the system status.
LED
Status
Off
System is disarmed.
On
In Valet mode.
Slow Flash
Passive Immobilised only.
Double Flash
System is armed and Immobilised.
Triple Flash
More than three consecutive incorrect Valet codes have
been entered (system ignores Valet switch for 2 minutes).
Flashing in Cycles
See "Specific Zone Intrusion Identification" chart on page 22.
Rapid Flash
Passive arming countdown.
If the vehicle had been tampered with and the alarm has been
triggered, the siren will chirp three times upon remote disarm
instead of the usual single chirp.
If you received the Previous Intrusion Alert confirmation (three
chirps upon remote disarm), when you enter the vehicle and turn
the ignition ON, the LED will flash in cycles to specifically identi-
fy which zone has triggered the alarm. The flash cycle will be
repeated two more times giving three cycles in total.
Specific Zone Intrusion Identification
Previous Intrusion Alert
LED System Status Indicator