Directed Electronics MAXX3 - Manual (Page 21)

®2002 Directed Electronics, Inc. 21
User-Programmable
Features
Turn the ignition key OFF, exit the vehicle, and close the doors.
When the interior lights turn off, the LED will begin flashing rap-
idly to indicate the alarm has begun it’s passive arming count-
down. After 60 seconds, the siren will chirp twice, the indicator
lights will flash twice, and the system’s LED will begin the double-
flash sequence explained in the Active Arming section.
NOTE: The alarm can be actively armed with the or button on
the remote control at any time during the passive arming countdown.
The system is factory preset not to lock the doors when the alarm
passively arms (unless Auto-rearm and lock is programmed on) to
prevent the keys and remote from being locked in the vehicle. If
you prefer, you can easily program the alarm to automatically
lock* the doors every time the alarm passively arms. (See the
Programming Table for System Features section of this guide.)
*Requires connection to your vehicle's existing central locking system.
Passive Arming With Door Lock
Passive Arming