ENMET LC-8 - Manual (Page 8)

LC S ERIES ENMET
6
3.1.1 Power Supply Module
The Power Supply is situated on the LHS of the main PCB within the enclosure and provides the power for the whole system.
The power supply is a standard item and does not require any modifications regardless of the type and quantity of detector
heads being used.
There are two power source options available to the system
100-240V AC Mains Supply, connectors 1, 2 and 3
18 to 28V DC Supply, connectors 4 and 5
There are two fuses situated on the main PCB. These are:
FS1 (T1.0A) AC supply Fuse
FS2 (T500mA) DC Supply Fuse