beautypg.com

Auto set done test 0 - gas 0 - unit off 2 off 1 – ENMET SMARTLOGGER User Manual

Page 11

background image

SMART LOGGER

ENMET Corporation

5

The display indicates:

The auto zero is done. The instrument executes a new internal test.

After 10 seconds, the instrument displays alternately:

-

The measurement (O) and the symbol of gas, for instance, CO.

-

The measurement (O) and the measurement unit, ppm or %.

3.3 Display Backlighting

- Press and maintain the OPTION switch. Note that frequent use of the backlight reduces the life of the battery.

3.4 Switching Off

- Press and maintain the ON/OFF switch. Then the display indicates the countdown.

- Then the instrument switches OFF, the display is blank, and the confidence beep ceases.

When the instrument is off, values are kept in memory even if the instrument is not used for a long time. The lithium primary
cell located inside the instrument allows a memorization from 3 to 5 years.

AUTO SET

DONE

TEST

0 - GAS

0 - UNIT

OFF 2

OFF 1