Elenco Bigshot Camera - Manual (Page 7)

4 5
Rotate the hand crank clockwise. If
it does not rotate smoothly, one of
the parts of the gearbox may be
misaligned. Carefully undo the
previous steps and reassemble the
gearbox.
Build
Build
B12. Clip the white crank cap onto the
hand crank so that it covers the three
screws. Before snapping the cover in
place, make sure you have lined up
the three tabs on the cover with the
slots on the hand crank.
B13.
B Power Generator
Place the shoot button into the hole
on the top face of the camera body.
You will have to insert it at an angle,
as shown.
C1. While the shoot button is in the hole,
rotate its arm clockwise until the arm
slides into the notch on the camera
body.
C2.
C Electronics
Learn about power generator
http://www.bigshotcamera.com/learn/power/index Learn about electronic components
http://www.bigshotcamera.com/learn/electronics/index