Elenco Bigshot Camera - Manual (Page 11)

8 9
After you have attached the lens
wheel, try gently rotating it in each
direction. It should snap into each
of the three lens settings.
Place the lens cover on top of the
lens wheel so that the two screw
holes on the cover and the wheel
are aligned.
Build
D7.
Then, fasten the lens cover with
two screws.
D9.
D8.
D Lens Wheel
Now cover the second spring with
the second spring cover.
D5. Push-fit the lens wheel into the
casing of the PCB module. Make
sure the two locks on the lens wheel
align correctly with the two notches
on the PCB module, as illustrated by
the blue and purple boxes.
D6.
Learn about the imaging lens
http://www.bigshotcamera.com/learn/imaging-lens/index Learn about the stereo prism
http://www.bigshotcamera.com/learn/lens-wheel/stereo