Elenco Bigshot Camera - Manual (Page 14)

12 13
Connect the camera to your PC/Mac using
the USB cable provided. Do not use force
or attempt to insert the connectors at an
angle.
The power indicator LED will start blinking
either green (when charge is low) or red
(when charge is extremely low) to indicate
that the camera is charging.
Charging is complete when the power
indicator stops blinking and turns solid
green.
Turn off the camera by setting the mode
dial to OFF position. Gently rotate the hand
crank clockwise as shown in the figure.
Maintain a speed of 30 to 60 rotations per
minute (rpm). The camera can take one
picture for every 5 to 7 rotations. But it is
better to rotate about 40 times so that
multiple photos can be taken.
Warning: Rotating the hand crank at less than 30rpm will not charge the battery fast
enough. Also, if you try to rotate faster than 60rpm and by applying greater force on
the hand crank, you may damage the gear box.
Using hand crank
Before you start using the camera, you will have to charge the battery. There are two
ways to charge the battery: using a USB charger or using the hand crank. We suggest
you use the first method whenever possible, and reserve the second method for
when you do not have access to a computer.
Using USB charger
Charging the Battery
Use
B