Build, E led flash – Elenco Bigshot Camera User Manual

Page 12

Take the LED ﬂash module and

insert it into the PCB module. The

ﬂash module can be inserted in only

one orientation. Make sure that you

match and align the tabs on the

ﬂash module with the notches on

the PCB module (see blue and

purple boxes), before pushing the

ﬂash module into the PCB module.

The wrist strap has a tiny loop and

a large loop. Squeeze the tiny loop

together and slide it through the

eyelet on the side of the camera

body.

Pass the big loop through the little

loop as shown on the left.

Build

E1.

Turn the LED ﬂash module clockwise

to lock it into the PCB module.

E2.

E3.

E4.

Then, pull on the big loop to tighten

the strap.

E5.

Congratulations. You’re done!

E6.

E LED Flash

Learn about the LED ﬂash
http://www.bigshotcamera.com/learn/led-ﬂash/index