Elenco DataCom Tester Kit - Manual (Page 19)

-18-
ASSEMBLE THE TELECOM CABLES
For testing and troubleshooting the tester, you need to assemble straight and cross-pinning cables.
For cutting, stripping, and crimping, use a standard tool for RJ-45 plugs (flat cable).
ELENCO ® has modular crimping tools Models ST-500 and HT-568.
r Cut the 2’ telecom cable in half (see Figure 12).
r Using the instructions for your tool, make two
cables (straight and cross-pinning) as shown in
Figures 13 - 15. Make sure that you make a
clean cut on the cable.
Figure 12 Cutting Figure 13 Stripping
Figure 15 Crimping Figure 14
(BL) 1
(OR)2
(BK) 3
(R) 4
(G) 5
(Y) 6
(BN) 7
(S) 8 1
2
3
4
5
6
7
8
(BL) 1
(OR)2
(BK) 3
(R) 4
(G) 5
(Y) 6
(BN) 7
(S) 8 1
2
3
4
5
6
7
8
Straight Cable
Cross-Pinning Cable
Note the orientation of the
RJ-45 plug for each cable.