Elenco Soldering Station - Manual (Page 2)

-1-
SAFETY PRECAUTIONS
Like all electrical devices, the solder station must be
handled with care. The soldering iron and tip can
reach high temperatures and these simple safety
rules should be followed.
• Keep children out of reach of the soldering station.
• To protect your eyes, use safety goggles.
• Keep flammable material away from the soldering
iron.
• DO NOT cool iron by dipping it into any liquid or
water.
• Always assume that the tip is hot to avoid burns.
• Work in an area that is well ventilated.
• Be careful that the hot soldering iron tip or the
barrel of the iron does not come in contact with any
electrical cord.
• Do not hold solder in your mouth. Wash your
hands thoroughly after handling solder.
• Locate soldering iron in an area where you do not
have to go around it or reach over it.
SOLDERING STATION KIT MODELS
These instructions are for the following electronic soldering stations. The model number of the electronic
soldering station that you have received, is marked on the end of the carton.
Model SL-5K is supplied without an iron.
Model SL-5K-40 is supplied with a 40 watt soldering iron, grounded plug, Model SR-6.
Model SL-5K-SPL is custom packaged with an iron of your choice of 25 to 60 watts, and other soldering
aids. A separate packing slip of the additional items will be enclosed.
The SL-5 series of soldering stations are quality
products designed to give the professional, student
and hobbyist greater control in quality soldering a
broad range of soldering situations. The stations are available with variable wattage irons. The AC
receptacle on the back of the station allows soldering
irons of up to 300 watt. The AC receptacle also
allows irons to be easily changed or replaced.
• Regulation of Temperature
• Non-Slip Base
• Iron Holder - Reversible, left or right side
• Stainless Steel Tray for Sponge Pad
• Sponge Pad
• Power On/Off with Indicator Light
INTRODUCTION
FEATURES