Elenco Computer Inteface for Snap Circuits® - Manual (Page 2)

If you have any questions contact:
ELENCO ®
150 Carpenter Avenue
Wheeling, IL 60090
(847) 541-3800
Website: www.elenco.com • e-mail: [email protected]
WARNING:
SHOCK HAZARD - NEVER connect
the probe to AC
power or a wall
electricity outlet for any reason since
serious injury or damage may result.
-1-
CI-73 - READ THIS FIRST
The CI-73 is a set of 73 Snap Circuits ® with special
software that allows you to “see” the electrical signals
in the circuits, just like electronics engineers do using
oscilloscopes and spectrum analyzers.
Requirements for your computer:
1. Windows
® computer with internet connection.
2. A microphone input port.
INSTRUCTIONS:
1. Download our software from www.elenco.com/downloads/CI-
73.zip (Windows ® may give you a warning, but our software is
safe to download). Go to the download and extract the
compressed files. Connect the plug end of our cable to the
microphone input (or microphone/USB
adapter) on your
computer. With our cable connected, open the extracted files
folder and run file
Winscope.exe .
2. Change the default settings for Winscope by selecting
. Then select and change Sampling to
44100 and press . Then select again, then
- and pick a bright color like pink. Then
select , then to save these settings
as your default.
3. Follow the instructions through project PC3 before
moving on to any other circuits, since the main features
of the software are demonstrated.
!