Elenco Rhinoceros Mini-Beest Kit - Manual (Page 20)

Assembling the Left
Frame and Legs
12
.
13
.
1
.
2
.
3
.
Attach two legs to the protrusions on the
frame as in Step 1.
Attach the frame to the legs in the direction as
shown in the figure. Next, attach four single-
action rods in the same way as described in Steps
4 to 9.
Assemble the left frame and legs. Attach two legs to
the protrusions on the left frame. Be sure to check the
orientation of the left frame.
Attach the frame to the legs in the direction as
shown in the figure. Make sure to attach the left
frame assembly in the opposite direction as the right
frame assembly.
Attach the frame to the second crank axis of the
crankshaft so that it snaps into place.
Attach in the same
direction as the two legs that
have previously been
attached. Insert the protrusions on the left
frame into the holes on the upper
triangles, as shown in the figure.
Orient the frame with
the tip with a hole side
up when attaching.
Frame
IMPORTANT
It may be difficult to
attach the frame as
the crankshaft may
get in the way.
Orient the frame with the protrusion with the
indented tip side up when attaching.
Frame
Crankshaft
Frame
Insert up to here.
Indent
Left frame
Leg
Leg
Lower triangle Lower triangle
Lower
triangle
Lower
triangle
Six legs are
assembled with
the right frame.
IMPORTANT
20
JR. SCIENTIS
T