Electrocompaniet ECT 2 - Manual (Page 9)

9
2 THE PREAMP MENU
2.1 Select input source
Go to the Preamp menu by
repeatedly pressing the DEVICE
button.
Then press the joystick to the left or
to the right to jump from one device
to another. You will see the result
on the remote controller screen and
on the device you control.
Adjust the volume
Press the VOL+ button to raise the
volume. Press the VOL- to lower the
volume.
Mute the system
Press MUTE/STANDBY to silence
the device under control.
Standby
Press the MUTE/STANDBY button
for 3 seconds to activate the standby
function. Deselect the standby func-
tion by simply pressing any button
on the remote controller.
Preamp function