Electrocompaniet ECT 2 - Manual (Page 23)

3
5 EC Master Control
5.1 Special commands
Backlight:
Select the intensity of the VFD display for all products connected to
the remote controller.
Use the joystick up/down to select function.
Use the joystick left/right to select function.
The backlight will change for all connected products.
Enable CDIR:
The ECT- is a hybrid system. Both radio and infrared communica-
tion is supported.
Use this function to turn on/off the IR function.
Use the joystick up/down to select function
Use the joystick left/right to select function
If you turn off the CDIR function, the menu for use of the IR is
removed, to reduce the number of unused screens. Turn on this
function if you have an existing EMP-1 or other equipment that you
want to control with the Remote controller.
EC Master Control