Electrocompaniet ECT 2 - Manual (Page 25)

5
4. Detect Serial Port.
When you get this window, please connect your
USB cable between the computer and the
product you want to update.
5. Detect Current Firmware
When you get this window, use the automatic iden-
tification, or select the product you want to upgrade
from the list.
As soon as the system has detected current version,
please press next.
6. Firmware Detection Information
You will find a list with latest version, and also
the recommended version to install.
7. Download new firmware to board
If you want to reset all setup stored in your system,
please mark out the selection box.
Press start firmware upgrade to start programming
new firmware to your system.
When the upgrade is ready you get the message,
upgrade result: Upgrade successful.
8. Finished
The system is updated. Please remove the USB cable
and restart all systems by turning them off for 5 sec.
Firmware