beautypg.com

Electrical characteristics curves – Delta Electronics Q48DR User Manual

Page 7

background image

DS_Q48DR1R533_03152007

8

ELECTRICAL CHARACTERISTICS CURVES

Figure 17: Input Terminal Ripple Current-i

c

, at full rated

output current and nominal input voltage with 12µH source
impedance and 33µF electrolytic capacitor (500 mA/div,
2us/div).

Figure 18: Input reflected ripple current-i

s

, through a 12µH

source inductor at nominal input voltage and rated load current
(20 mA/div, 2us/div).

Strip

Copper

Vo(-)

Vo(+)

10u

1u

SCOPE

RESISTIV

LOAD

Figure 19: Output voltage noise and ripple measurement
test setup

Figure 20: Output voltage ripple at nominal input voltage and
rated load current

(Iout1=Iout2=15A)(20 mV/div, 1us/div). Top

trace: Vout2(20mV/div), Bottom trace(20mV/div)
Load capacitance: 1µF ceramic capacitor and 10µF tantalum
capacitor. Bandwidth: 20 MHz. Scope measurements should be
made using a BNC cable (length shorter than 20 inches). Position
the load between 51 mm to 76 mm (2 inches to 3 inches) from
the module.