Dream Property DM600 PVR - Manual (Page 21)

21
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
english
4. Basic operation
4.1
Turning your Dreambox on and off
Use the Standby-Button to turn your Dreambox on and off.
To put your Dreambox into Standby-Mode either press the Standby-Button on your remote
control or on your Dreambox.
Holding down the Standby-Button on your remote control for three seconds will show the
Shutdown / Standby menu.
This is the Shutdown / Standby menu.
Navigate to the desired option and
confirm by pressing the OK-Button.
Shutdown now:
Puts your Dreambox into Deep-Standby-Mode.
Reboot now:
Your Dreambox will be rebooted.
Goto standby:
Your Dreambox goes into standby mode.
Set sleeptimer:
You can find an explanation in the section Sleeptimer.
4.2 Service
selection
Pressing the Left/Right-Buttons on your Dreambox remote control will take you to the
previous or next service.
Pressing the 0 on the Numeric-Keypad will enable you to skip back and forth between the
two most recently watched services. This feature is quite useful during commercial breaks
since it enables you to watch another channel and quickly check if your movies is back on.
Using the Navigation-Buttons left/right you can switch to the 20 last viewed services.