Ditch Witch RT120 - Manual (Page 108)

RT120 Operator’s Manual
Trench - 107
Operation
CMW
Finish Trenching
1. When trench is complete, move ground drive hand control to neutral.
2. Adjust throttle to low idle.
3. Raise boom.
4. As boom clears top of trench, move attachment speed/direction control to neutral.
5. Raise trench cleaner.
6. Swivel seat to the drive position.
7. Disengage axle lock.
8. Drive a short distance away from work site. See page 86 for driving procedures.
9. Shut down tractor. See page 88 for proper shutdown procedures.
10. Stow trench cleaner.
IMPORTANT: Drive tractor in reverse 6’ (2 m) while turning steering wheel left to right to fully
disengage axle lock.