Dillon Precision RL 550 Casefeed - Manual (Page 14)

15 14
I ncrease the stability of
your reloading bench
with Dillon’s new Strong
Mounts. These heavy
gauge steel Strong Mounts
increase the machine’s
“footprint” to over 10”,
spreading the load over the whole bench
instead of stressing the leading edge.
Strong Mounts raise your machine 6” to 8”,
providing a comfortable work height for peo-
ple who prefer to stand while reloading. For
some XL 650 owners, overhead clearance can
become a problem, so we designed a mount
especially for this application. The XL 650-only
mount raises the machine 6” above the bench
top. All mounts come with all the fasteners
necessary to mount your machine (550/650
mount includes RL 550B bin bracket) and are
coated with a durable black wrinkle finish.
RL550/XL650 Strong Mount Stock #22051
D illon’s original RL
1000 came
equipped with a simple,
shallow aluminum bul-
let tray that was
designed for economy
of motion when loading.
For years, our attempts
to duplicate the efficiency and the “feel” of
that tray in other machine applications were
less than satisfactory. It took the development
of the Strong Mount for the RL 550 and the XL
650 to enable us to place the redesigned tray
exactly where it needed to be.
Our aluminum tray works on the Square
Deal ‘B’, the RL 550B and XL 650 when
equipped with the RL 550/XL 650 Strong
Mount, and a separate kit is available for
the RL 1050. Comes with a Dillon Blue
powder coat finish.
Bullet Tray Kit Stock #22214
Strong Mount Bullet Tray Kit
M agnum rifle cartridges can require
from 70 grains to well in excess of 100
grains for a single charge. Our new “Belted
Magnum” Powder System features a new,
maximum-capacity, steel powder bar that
can dispense more than 100 grains of
extruded IMR powder.
Our magnum powder system can be
used with your RL 550B, XL 650 or AT
500 reloader, and is ideal for loading
large-caliber, magnum rifle cartridges.
We tested this system with various
extruded rifle powders and found that
powder charge variations stayed within
plus-or-minus three-tenths of a grain.
The “Belted Magnum” Powder System is
based on our SL 900 Shot Dispenser, so the
Maximum Charge Bar won’t work in our
standard powder measures – you’ll need to
buy the entire system. The good news is that
the “Belted Magnum” Powder System has an
integral drain, so it’s easy to empty the
hopper in order to change powder types; so,
if you load several big calibers with
various powders, it’s easy to switch from
one to another.
Keep plenty of extra powder on hand,
because when you’re dispensing 100-
plus grains into every cartridge, you’re
gonna need it!
Magnum Powder System
Stock #97126
‘Belted Magnum’ Powder System
Toolhead and
Toolhead Stan
d
Not Included
Toolhead Cover (L) for use
without powder measure.
Stock #11142
Quick-Change Cover (R) for
use
with pow-
der measure.
Stock #11143
Dust Covers
1 ” die lock rings
and a 1” wrench
to fit them gives you
much more room to re-adjust your dies after
they’re already mounted in the toolhead.
5-Pack of Die Lock Rings Stock #10669
1” Dillon Bench Wrench Stock #10842
Bench
Wrench
550 Casefeed Manual, May 2007 5/22/07 8:30 AM Page 14