DICE Electronics DOU VW - Manual (Page 8)

8
DIP switch configuration (DUO-103-AVW only)
The configuration switches located on the Silverline DUO module are used to set functionality for various radio
models. Refer to pages 23-27 for correct DIP switch settings. Incorrect dip switch settings may cause the
interface to not work properly or to not operate at all. Disconnect the vehicle harness from the module and
cycle ignition off for 60 seconds after changing the switches then reconnect the module!
Silverline DUO module
This setting must be performed for proper functionality of the DUO kit. See pages 23-27 to deter-
mine the correct DIP switch setting for your vehicle’s specific radio (DUO-103-AVW only).