DaySequerra MultiMerge2 - Manual (Page 16)

16
MultiMerge2
User
Manual
Keylock
Settings
Keylock Settings sub-menu will allow for configuration of the keylock timeout setting or disabling the
automatic keylock altogether. After the user specified period of inactivity, the keylock will automatically
enable. (Default: 15 min)
Figure 9. Keylock on Multimerge2
Faults
Although your MultiMerge2 will provide you with years of trouble free service, occasionally problems
may occur. Below is a listing of the most common fault conditions.
No Sync: AES sync has been lost. Please check the source equipment and all cable connections.
Ensure that MultiMerge2 is operating in the proper input mode for your application and is looking for the
source audio on the correct port.
CRC Error: MultiMerge2 has encountered a CRC error in the audio stream. Check that equipment up-
stream of MultiMerge2 is properly configured to output the correct audio stream.
Validity Error: MultiMerge2 has encountered a validity error with the audio stream. Check that
equipment up-stream of MultiMerge2 is properly configured to output the correct audio stream.
Bi-phase Error: MultiMerge2 has encountered a bi-phase error with the audio stream. Check that
equipment up-stream of MultiMerge2 is properly configured to output the correct audio stream.
No Parity Error: MultiMerge2 has encountered a parity error with the audio stream. Check that
equipment up-stream of MultiMerge2 is properly configured to output the correct audio stream.
Firmware
Update
Provided that you have completed warranty registration for your MultiMerge2 on our website, we will
notify you as new firmware updates become available. The notification will contain the announcement
of new firmware, issues corrected, and instructions on how to retrieve the update files.
Update packages will be available as a single .ZIP file for download. Compatible archive programs
include Winzip (
www.winzip.com ) or WinRAR ( www.rarlabs.com ) and may be downloaded from their
respective websites. The update package will contain four files; dsp2531.bin, firmdown.exe, readme.txt
and update.bat.