DaySequerra iLM8 Live - Manual (Page 32)

32
iLM8 – Live User Manual
Diagnostics Menu
Figure 12. Diagnostics Menu Screen Display
Current Faults: Displays any error states that iLM8 - Live may be in.
DSP 1 Utilization: Shows the current load on iLM8 - Live’s DSP.
DSP 2 Utilization: Shows the current load on iLM8 - Live’s secondary DSP.
LED Test: Turns on all front-panel LED indicators to verify their functionality.
Meter Brightness: Allows adjustment of iLM8 - Live’s Input and Output meters. (Default: 0)
Display Brightness: Allows adjustment of iLM8 - Live’s display output. (Default: Max)
Restore Settings: Returns all settings to their factory default values and will reboot the unit. Network
settings will not be lost.
Reboot Unit: Performs a warm boot. No settings are erased or restored to default
GPIO Test: A sub-menu that turns on the ALARM outputs for testing.
• GPIO Output: Allows for testing of the internal signaling circuit within iLM8 - Live. The two fields
displayed represent each output, 1 and 2, respectively
• GPIO Input: Shows the current state of the GPIO inputs. The four fields of the displayed status
represent each input, 1-4, respectively
Alarms Menu
Figure 13. Alarms Menu Screen Display