DaySequerra iLM8 Live - Manual (Page 17)

iLM8 – Live User Manual
17
Meter Display
Figure 1. Metering display iLM8 - Live.
INPUT LEVELS – LED display shows current amplitude of input signal from -60dB to 0dB across all
active channels. Unused channels will not light the display. The Meters are updated every 20ms.
L - Left (AES Input 1/2) Ls - Left Surround (AES Input 5/6)
R - Right (AES Input 1/2) Rs - Right Surround (AES Input 5/6)
C - Center (AES Input 3/4) ST-L – Stereo Left (AES Input 7/8)
LFE - Low Frequency (AES Input 3/4) ST-R - Sterreo Right (AES Input 7/8)
Note: “7.1 Back” channel meters are reserved for a future software version. Presently iLM8 - Live does
not measure 7.1 surround
Programming Menu
If AC line power is lost or momentarily interrupted, iLM8 - Live will revert to its previous state.
To enter the programming menu, press the ENTER button while on the HOME SCREEN. Use the
ROTARY KNOB to navigate up and down. Press ENTER to select a sub-menu. Press ENTER to
store/save a selection. Press the BACK button to navigate to the previous menu level or revert the
current value to its last stored state. From the HOME SCREEN pressing HOME will highlight additional
icons. Turn the ROTARY KNOB to scroll and ENTER to select. Pressing HOME will always revert to
the HOME SCREEN.
Menu Functions and Descriptions
Figure 2. Main Menu Screen Display