beautypg.com

0299 option marking, Colors, Certification – Bullard H1000OEM User Manual

Page 4

background image

©2011 Bullard. All rights reserved.
Sure-Lock is a registered trademark of Bullard.

6029009189DEU (0112)

ISO 9001

certified

0299

Option

Marking

Electrical properties classification
• wet helmet insulation test according 4.12.2
• surface insulation test according 4.12.3


E3

Classification Low temperature: -40°C

****

C: Classification liquid chemicals

NaOH, HCe, H

2

SO

4

, O-Xylen

Options and Marking

Accessories and replacement parts

The use of components other than mentioned below along with the helmet
might cease the CE approval of your helmet according EN443:2008.
All accessories and replacement parts are designed for the use along with
your helmet.
These must not be used along with other helmets or as self contained
equipment.
HBR

Head ring with ratchet H2000

HBP

Head ring with pinlock H1000

OEM

CH3PT

Chin strap H2000

CH3PTH1

Chin strap H1000

OEM

R160

Ratchet cover H2000

R635

Brow pad both models

VBLKN

Visor carrier H2000

R1003

Visor 10cm H2000 Type A

R1005

Visor 15cm H2000 Type B

VMESH

Mesh visor H2000

ALUFRAME

Visor carrier H1000

OEM

ALUWINDOW

Visor 15cm H1000

OEM Type B

R729

Neckprotector Nomex both models

R732

Dutch ear Neck Protector both models

STRH2

Reflective stripes H2000

STRH1

Reflective stripes H1000

OEM

XTOMOD protective goggle
VSTD15

Visor 15cm, Type B

Accessories and replacement parts are subject to technical changes and
completion. Please check www.bullardextrem.com for latest information

Colors

H2000 lumenescent yellow.
H1000

OEM and other colors on demand.

Certification

Your helmet has been tested and certified according EN443:2008,
visors according EN14458:2004, the goggles XTO according EN166.
The helmet is suitable for structural fire fighting and Hot Training.
Hot Trainings can damage the helmet which is not covered by the regular
warranty.
It is recommended to provide separate helmets dedicated to Hot Training. Or
use Nomex Hoods

Notified Body:
0299
FA PSA Prüf- und Zertifizierungsstelle
Zwengenbergerstrasse 68
42781 Haan

Americas:

E.D. Bullard Company
Owner of certificate and distribution
Bescheinigungsinhaber und Vertrieb
1898 Safety Way
Cynthiana, KY 41031-9303
Toll free: 877-BULLARD (285-5273)
Tel: 859-234-6616
Fax: 859-234-8987

www.bullard.com

Europe:

Bullard GmbH
Bevollmächtigte Vertretung und Vertrieb
Authorized Representative and
Distribution
Lilienthalstrasse 12
53424 Remagen • Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829

www.bullardextrem.com

Asia-Pacific:

Bullard Asia Pacific Pte. Ltd.
Authorized Representative and
Distribution
LHK Building
701, Sims Drive, #04-03
Singapore 387383
Tel: +65-6745-0556
Fax: +65-6745-5176

www.bullard.com

WARNING

The protection provided by a helmet depends on the circumstances of an accident, and wearing a helmet cannot always prevent serious or even fatal injuries
or long-term invalidity.
Always wear a correctly-adjusted helmet and straps, and always bear in mind that a helmet cannot protect the neck area or other unprotected areas of the
head.
Ensure that wearing respiratory equipment does not affect the fit of the helmet and vice versa.
This helmet is only approved for use in fire service, rescue service and disaster control operations.
It is especially unsuitable as a sports or motorcycle helmet.

This manual is related to the following products: