Bimba SPCS - Manual (Page 16)

2014.01.23 rev4 16
4. Appendix - Auto Com Port Detection
g. Next, select on the Driver tab (the following image is for
example purposes only, your driver properties menu may
appear differently).
h. Click on “Update Driver”.
i. A new window will open. Click “Search automatically
for updated driver software” (to enable to search online
{where the drivers are typically found}, establish an
interent connection prior to searching).
j. After the process is complete, the device under the Ports
section on the Device Manager window should be visible
and free of errors. If not, continue onto Step 2. In this
case, Port 7 is the connection to the SPCS.