Datalogic Scanning Reader Matrix-1000 - Manual (Page 7)

MATRIX-1000™ QUICK GUIDE
7
The Autolearning Wizard option is advised for rapid configuration or for new users. It allows reader configuration
in a few easy steps.
1. Select the Autolearning Wizard button from the Main menu.
2. Place the desired code in front of the reader at the correct reading distance (depending on the model, see the
Reading Features table in the Appendix of this Quick Reference Guide).
3. Press the "Positioning" button. The reader continuously acquires images and gives visual feedback in the
view image window to indicate when the code is centered with respect to the reader's FOV. Move the reader
(or code) to center it. Press the Positioning button again to stop positioning.
4. Select a Calibration Mode choice and press the "Calibrate" button.
The reader flashes once acquiring the image and auto determines the best exposure and gain settings. If the
code symbology is enabled by default, the code will also be decoded.
3
4
5
Autolearning
Result