Bootloader settings for booting from sd card – Avalue BFC-10R1 User Manual
Page 49

User
’s Manual
RSC-IMX51 User
’s Manual
49
$ sudo umount /mnt
The Ubuntu file system content is now on the SD card. Please use user account
“lucid” to log into system on serial terminal and password of the account is “lucid”
Password of root account is
“lucid”.
4.7 Bootloader settings for booting from SD card
1) Please refer to section 2.3.2 and set SW2 to boot from SD socket.
2) Insert SD card on SD socket. Connect RS232 cross over cable from CN9 of
RSC-IMX51 to COM port of Host PC.
3) Run hyper terminal program on Host PC (teraterm on Windows or minicom on Linux)
4) Power on RSC-IMX51 and press
”space” key to get into bootloader menu.
5) Setup boot device
BBG U-Boot > setenv bootcmd
‘run bootcmd_sd2’
6) Save bootloader setting
BBG U-Boot > saveenv
7) Press reset button and boot RSC-IMX51 again