Avalue BFC-10R1 - Manual (Page 30)

RSC-IMX51
30 RSC-IMX51 User ’s Manual
3.1 Installing Windows Embedded Tools and RSC-IMX51 BSP
To create the complete RSC-IMX51 development environment, install the Microsoft
Windows Embedded CE 6.0 development tools and the RSC-IMX51 BSP as follows:
1) Install Visual Studio 2005 and the Windows Embedded CE 6.0 Platform Builder plugin
on Windows XP from the installation discs. The following must be installed in order to
create a Windows Embedded CE 6.0 development environment for RSC-IMX51 WinCE
6.0 BSP:
 Visual Studio 2005
 Visual Studio 2005 SP1
 Visual Studio 2005 SP1 Update for Vista (if applicable)
 Windows Embedded CE 6.0 Platform Builder
 Windows Embedded CE 6.0 SP1 (required if PB 6.0 Tools have been installed)
 Windows Embedded CE 6.0 R2
 Windows Embedded CE 6.0 R3
 Windows Embedded CE 6.0 R3 Update Rollup
 Windows Embedded CE 6.0 Cumulative Product Update Rollup Package (through
12/31/2010)
 Windows Embedded CE 6.0 Monthly Update January 2011
 Windows Embedded CE 6.0 Monthly Update February 2011
2) Follow steps below to install RSC-IMX51 binary BSP and generate WinCE image
 Unzip RSC-iMX51_BinaryBSP.zip
 Copy BSP folder RSC_iMX51_BIN to C:\WINCE600\PLATFORM\
 Copy folder SUPPORT to C:\WINCE600\
 Copy OS design project folder RSC_iMX51_BIN_Demo to
C:\WINCE600\OSDesigns\
 In Platform Builder 6.0 which is bundled with VS2005, implement File => Open =>
Project/Solution to open OS design project file RSC_iMX51_BIN_Demo.sln
 Confirm the demo project is built with release mode first. If not, please change it.
 Click Project => Properties to go to Property Pages.
 In Build Options, uncheck the checkbox Item "Enable KITL" and check the item
"Enable kernel debugger"
 After finishing settings, implement Build => Build Solution to make a new CE image
NK.bin