Avalue BFC-10R1 - Manual (Page 37)

User ’s Manual
RSC-IMX51 User ’s Manual 37
3.8 Using mfgtool to Flash eMMC onboard
Manufacturing tool, a successor of ATK, provides a series of new features to power your
mass production work. The features like windows style GUI, multiple devices support,
explicit status monitoring, versatile functionalities and highly flexible architecture make it a
best choice to meet your critical timing, cost and customization requirements.
1) Unzip the tool package to your local directory, say: D:\ Mfgtools-Rel-1.6.2.042\, and
enter it, you will find an .exe file named MfgTool.exe. Without any installation step, you
can run it directly. So, just run it. You should be able to see below user interface.
2) The user interface appears to have nothing to do since there is nothing is selected, so
let’s configure something necessary.
Click Profile drop menu, you will find a number of platforms, choose the right one
according to your platform
3) Now you need to connect your board to one USB port of your PC. Please make sure
you have set RSC-IMX51 SW2 to USB OTG mode before powering on the board.
Please refer to platform specific document to see how to set the board to bootstrap
mode.
If your device is in below device list, then you will find a HID mode device appears on
your PC when you connect your board to one USB port and power on it. Please jump to
Step 4.
You will find below popup window when you connect your board to one USB port and
power on it.