Alwarerc ALware Quad Flyer Spider 500 ( Kit Only ) User Manual
Page 8
Step 13.
Bend and insert an Arm Rib onto the upper
side of the Spider Arm Set.
Step 14.
The end side of the Arm Rib with a small
hole should be placed oppose to the Motor
Mount. (Remarks: the assembly direction for
the Arm Rib is important and unique!)
Step 15.
Prepare a GAUI 10A ESC(not included) to
get ready to place inside the Spider Arm
Assembly. (Other brands of ESCs could
also be used, installation for large ESCs
please refer to step 19.)
Step 16.
Place the 10A ESC under the Arm Rib
Frame installed on the Spider Arm as shown
above.