Alwarerc ALware Quad Flyer Spider 500 ( Kit Only ) - Manual (Page 6)

Step 5.
Prepare 2x Spider Arm Frames, 2x Hex Alu
Rod 39mm, 5x Round Alu Rod 35mm, 4x
M2x6 Hex Cap Screws and 5x M2x8 Hex
Cap Screws.
Step 6.
Secure a Hex Alu Rod onto one end edge of
the Spider Arm Frame using 2x M2x6 Hex
Cap Screws.
Step 7.
Maintain the Hex Alu Rod parallel to the end
edge of the Spider Arm Frame while
tightening the screws.
Step 8.
Secure another Hex Alu Rod onto another
Spider Arm Frame using 2x M2x6 Hex Cap
Screws. (Remarks: the assembly direction
must be as same as the photo shown
above.)
www.alwarerc.com