Alwarerc ALware Quad Flyer Spider 500 ( Kit Only ) - Manual (Page 32)

Setting Illustration:
The following setting data is just for reference as with different Gyros and equipment ,
different settings will be requested.
Testing Equipment:
Kit:
Quad Flyer Alware Spider 500X
Gyro: GAUI GU344
Motors: 4x GAUI Scorpion 2208-1050kv (330X S) BL Motor
Propellers: 4x 10 Inches Props
Speed Controls: GAUI-10A BL ESC
Battery: APLUS XT 2200mAh-35C 3S1P
Servo for 2-Axises FPV Mount: Align DS410M and DS420
Flying Time:
8-10 mins
Transmitter and receiver to control Spider 500X:
Fubata 9C with Spektrum 2.4GHz Module DSM2
Receiver: JR RD721 (7 channels)
Transmitter and receiver to control the 2-Axises FPV Mount:
JR DSX7 Transmitter with RD 721 Receiver.
Setting for Spider 500X on transmitter (Used with Heli Mode):
GYRO SENS:
38%
END Point: AIL 37%; ELEV 37%; RUD 55%; GYR 70%
Setting for 2-Axises FPV Mount on transmitter (Used with default
Airplane Mode):
ELEV (to control the “Tilt” axis)
RUD (to control the “Pan” axis)
End of Manual
Thank you for your support!
www.alwarerc.com