Alwarerc ALware Quad Flyer Spider 500 ( Kit Only ) - Manual (Page 12)

Step 29.
A Complete Spider Arm Set is finished.
Step 30.
Repeat step 5-29 to complete total four sets
of Spider Arms.
Step 31.
Prepare 2x Central Frames, 4x Round Alu
Rod 35mm, 4x M2x8 Hex Cap Screws, 8 x
M2x6 Hex Cap Screws and 8x Washers
2x5x0.5mm.
Step 32.
Place a Central Frame on top of a
block(such as screw box shown above) to
get ready to assembly the Spider Arm Sets
onto the Central Frames conveniently.
www.alwarerc.com