ADLINK MLC 4-21 - Manual (Page 33)

MLC 4-xx Technical Manual Rev. 1.2 Appendix
Document: Manual_Medical_MLC_1.2 Page 33 of 37 pages Last change date: 18-Feb-15
13. A
PPENDIX
13.1. EN 60601-1-2 tables
13.1.1. Guidance and manufacturer’s declaration – electromagnetic emissions (IEC 60601-1-2:2007 Table 1)
The MLC 4-xx is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an
environment.
Emissions Test
Device compliance to
IEC/EN 60601-1-2:2007
(3
rd
edition)
Device compliance to
IEC/EN 60601-1-2:2014
(4
th
edition)
Electromagnetic Environment - Guidance
RF Emissions
CISPR 11 (modified)
Group 1 Group 1
The device uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
RF Emissions
EN55011
Class B Class B
The device is suitable for use in all establishments, including domestic estab-
lishments and those directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes. Harmonic emissions
IEC 61000-3-2
Fulfilled Fulfilled
Voltage fluctuations/flicker emis-
sions
IEC 61000-3-3
Fulfilled Fulfilled