ADLINK MLC 4-21 - Manual (Page 30)

MLC 4-xx Technical Manual Rev. 1.2
Common warnings, handling
and safety instructions
Document: Manual_Medical_MLC_1.2 Page 30 of 37 pages Last change date: 18-Feb-15
No modification of this device is allowed!
To separate the device completely from the mains power supply, pull the plug
out of the mains socket at the back side of the unit. Make sure, that the back
side of the device will be accessible at any time.
Note: If optional cable cover is mounted, ensure that the power cord is acces-
sible/removable from the power outlet.
To avoid risk of electric shock, this equipment must only be connected to sup-
ply mains with protective earth!
To avoid influences between present equipment and the PENTA device
caused by electromagnetic phenomena, refer to chapter 13.1 EN 60601-1-2
tables; this appendix documents ambient conditions to be considered for save
and reliable operation.
To avoid risks for patients that may arise due to a direct contact to the device,
take care, that the minimum distance of 1.5m between the device and a patient
is always kept.
!
!
!
!
!