ADLINK CoreModule 920 - Manual (Page 56)

Chapter 4 BIOS Setup
50 Reference Manual CoreModule 920
 CSM parameters
• Launch CSM [Always; Never]
• Boot option filter [UEFI and Legacy; Legacy only; UEFI only]
• Launch PXE OpROM policy [Do not launch; UEFI only; Legacy only]
• Launch Storage OpROM policy [Do not launch; UEFI only; Legacy only]
• Launch Video OpROM policy [Do not launch; UEFI only; Legacy only]
• Other PCI device ROM priority [UEFI only; Legacy OpROM]
Security BIOS Setup Screen
Figure 4-5. Security BIOS Setup Screen
• Password Description
 Administrator Password [Create New Password]
 User Password [Create New Password]
 HDD Security Configuration:
Aptio Setup Utility - Copyright (C) 20XX American Megatrends, Inc.
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following rang:
Minimum length 3
Maximum length 20
Version X.XX.XXXX. Copyright (C) 20XX American Megatrends, Inc.
CM920_BIOS_Security_a
Main Advanced Chipset Boot Security Save & Exit
Administrator Password
User Password
[Setting Description]
: Select Screen
: Select Item
+/- : Change Opt.
F1 : General Help
Enter : Select
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC: Exit
HDD Security Configuration:
HDD0: GLS85LS1008P