ADLINK CoreModule 920 - Manual (Page 14)

Chapter 2 Product Overview
8 Reference Manual CoreModule 920
• USB 2.0 Interface
 Provides two root USB 2.0 hubs
 Provides up to six USB 2.0 ports
 Supports USB bootable devices
 Supports USB Keyboard and Mouse
 Supports USB v2.0 EHCI and v1.1 UHCI
 Supports over-current detection status
• Ethernet Interface
 Provides two fully independent Gigabit Ethernet ports
 Provides integrated LEDs on each port (Link/Activity and Speed)
 Provides one Intel 82574IT controller chip and one 82579LM PHY transceiver chip
 Provides two 10-pin headers for Gigabit Ethernet user interface
 Provides two headers for GLAN LED signals
 Supports IEEE 802.3 10/100BaseT and 10/100/1000BaseT compatible physical layers
 Supports Auto-negotiation for speed, duplex mode, and flow control
 Supports full-duplex or half-duplex mode
• Full-duplex mode supports transmit and receive frames simultaneously
• Supports IEEE 802.3x Flow control in full-duplex mode
• Half-duplex mode supports enhanced proprietary collision reduction mode
• Video Interfaces (VGA, HDMI, LVDS, and PEG)
 Provide VGA outputs
• Resolutions up to 2048x1536 pixels at 75Hz
• Integrated 340.4MHz RAMDAC with 32-bit color
• RGB output provided by three 8-bit DACs
• HSYNC and VSYNC output
 Provide HDMI outputs
• Resolutions up to 3840x2160 pixels at 30Hz
• Pixel clock rates from 25MHz to 340MHz
• Support for DVD-Audio and Audio Return Channel
 Provide LVDS flat panel outputs
• Single channel capability
• Resolutions up to 1400x1050 at 60Hz
• Pixel clock rates of 25MHz to 112MHz
• Pixel color depths of 18 and 24 bits
 Support PCI Express graphics (PEG)
• External high-performance PCI Express graphics cards
• General-purpose PCI Express devices
• Theoretical bandwidth of up to 8GT/s
• PCIe Gen3 compliance