ADLINK CoreModule 920 - Manual (Page 50)

Chapter 4 BIOS Setup
44 Reference Manual CoreModule 920
 COM (SOL) (Pci Bus0, Dev22, Func3)
• Console Redirection [Disabled; Enabled]
• Console Redirection Settings
- Terminal Type [VT100; VT100+; VT-UTF8; ANSI]
- Bits per second [9600; 19200; 38400; 57600; 115200]
- Data Bits [7; 8]
- Parity [None; Even; Odd; Mark; Space]
- Stop Bits [1; 2]
- Flow Control [None; Hardware RTS/CTS]
- VT-UTF8 Combo Key Support [Disabled; Enabled]
- Recorder Mode [Disabled; Enabled]
- Resolution 100x31 [Disabled; Enabled]
- Legacy OS Redirection [80x24; 80x25]
- Putty KeyPad [VT100; LINUX; XTERMR6; SCO; ESCN; VT400]
• Intel ICC (Integrated Clock Control options)
 Use Watchdog timer for ICC [Disabled; Enabled]
 Turn off unused PCI/PCIe clocks [Disabled; Enabled]
 Lock ICC registers [Static only; All registers]
 Clock Manipulation
 ICC Overclocking Lib X.X.X.XX
 DIV-1S
• DIV-1S
• GFX
• Maximum supported frequency XXX.XX MHz
• Minimum supported frequency XXX.XX MHz
• Current frequency XXX.XX MHz
• Current SSC mode Down
• Current SSC % X.XX%
NOTE The serial port console is not hardware protected. Diagnostic software that
probes hardware addresses may cause a loss or failure of the serial console
functions.