ADLINK NuPRO-E72 - Manual (Page 41)

Getting Started 29
NuPRO-E72
4. Insert the module firmly into the slot until the retaining
clips snap back inwards and the module is securely
seated.
2.5 Jumpers & Switches
Clear CMOS Jumper (JBAT1)
To clear the BIOS settings (RTCRTS# asserts):
1. Power down and disconnect power from the system.
2. Short pins 2-3 on JP1.
3. Reconnect power and power up the system.
4. Wait 3 seconds or more.
5. Power down and disconnect power from the system.
Break
Notch