3 esata connector 2.3.4 audio jacks, Table 2-7: active/link led table 2-8: speed led – ADLINK MXE-5300 Series User Manual
Page 27

System Description
17
MXE-5300
Table 2-7: Active/Link LED
Table 2-8: Speed LED
2.3.3
eSATA Connector
One eSATA port connector is located on the back panel, support-
ing external SATA storage expansion at data transfer rates up to
3.0Gb/s(300MB/s) / 1.5Gb/s(150MB/s).
The host SATA controller provides two modes of operation: a leg-
acy mode using I/O space, and an AHCI mode using memory
space. This connector supports only SATA singaling, and SATA
HDD or SSD requires connection to an external power supply for
operation.
2.3.4
Audio Jacks
The MXE-5300 implements Intel High Definition audio on a
Realtek ALC269 chip. The HD audio supports up to 24-bit, 192
KHz sample rate high quality headphone/speaker output and
microphone input. Access is provided by the pink jack for micro-
phone input and the green jack for output.
LED Color Status
Description
Yellow
OFF
Ethernet port is disconnected.
ON
Ethernet port is connected and no data
transmission.
Flashing
Ethernet port is connected and transmitting/
receiving data.
LED Color Status
Description
Green/
Orange
OFF
10 Mbps
Green
100 Mbps
Orange
1000 Mbps